TI Mfg. Safety Clamps


Safety Clamp Types:

Drill Collar Safety Clamps

Relative Links

Comments:

None at this time

Drilling Tools • Four Types

Four Types:

MP Safety Clamps are essential tools for handling drill collars, drill pipe, tubing,flush joint pipes and small shoulder pipes. By adjusting the quantity of chains links they can fit pipes of different sizes.  More on MP Safety Clamps

Safety clamp are desgined to hold flush joint tubular or other slick tools safely and prevent the dropping of strings (tubing, drill collar etc.) into well. The T and C sizes range from 1-1/8" up to 47" with the ease of adding or removing of links.

Texas International Oilfield Tools Manufactures four types of Safety Clamps: Type "C", Type "T", Multi-Purpose (MP)  and the addition of Air Over Hydraulic available on all three types. TI your source for hard-to-find oilfield and rig equipment and parts. We will engineer to your needs for a specific project or need. .


The terms VARCO, VARCO-BJ, and BJ are trademarks of Varco I/P, Inc., National Oilwell Varco, L.P., or their affiliates. Texas International Oilfield Tools is not an authorized distributor of any Varco I/P or NATIONAL OILWELL VARCO product. Texas International Oilfield Tools is not affiliated with Varco I/P, Inc., National Oilwell Varco, L.P., or their affiliates. Varco I/P, Inc., National Oilwell Varco, L.P., and their affiliates do not endorse any Texas International Oilfield Tools' products or replacement parts.


ALT NAME

Type "T"

ALT NAME

Type "C"

ALT NAME

Multi-Purpose (MP)