Farr KT5500 Power Tongs with Clincher Back-up 5-1/2" - 18K
Texas International Oilfield Tools, LTD. the world's largest stocking distributor of Farr Canada products.
DOWNLOAD MANUAL file updated 9/10
| KT5500 18K Tongs with hydraulic Clincher Back-up | ||||
| TORQUE TABLE | ||||
| Pressure | HIgh Gear | Low Gear | ||
| PSI/MPa | Lbs ft. | Nm | Lbs. ft. | Nm |
| 1000/6.89 | 1260 | 1708 | 6300 | 8542 |
| 1500/10.34 | 2160 | 2929 | 10800 | 14643 |
| 2000/13.79 | 3060 | 4149 | 15300 | 20744 |
| 2500/17.24 | 3960 | 5369 | 19800 | 26845 |
| MAXIMUM RATED TORQUE: 18700 LBS.-FT./25354 Nm | ||||
| SPEED TABLE | ||||
| Flow (US GPM/LPM) | Low Gear (RPM) | High Gear (RPM) | ||
| 10/37.9 | 2.7 | 13.4 | ||
| 20/75.71 | 5.4 | 56.8 | ||
| 40/151.4 | 10.7 | 53.6 | ||
| 50/189.3 | 13.4 | 67.1 | ||
| Hydraulic Requirements (max.): | 50 GPM @ 1000 psi (189 LPM @ 6.0 MPa) 10 GPM @ 2000 psi (38 LPM @ 13.8 MPa) |
|||
| Length (Doors Closed): | 52"/132.1cm | |||
| Height: | 60"/152.4cm | |||
| Width: | 37"/94cm (Model 80-0421-3 Tension LC) 35"/89cm (Models 80-0422 & 80-0406 Comp LC) |
|||
| Space Required on Pipe: | 6-3/4"/17.1cm | |||
| Maxiumum Elevator Diameter: | N/A | |||
| Torque Arm Length: | 30"/76.2cm (Tension Load Cell Configuration) 32"/81.3cm (Compression Load Cell Configuration) - Centerline of pipe to Centerline of anchor - |
|||
| Weight (Approximate): | 2775 lbs./1261 Kg | |||
| Casing Jaws Available (inches): | see table below | |||
| Description | Part Number | |||
| 2-3/8" Jaw Die Kit | 1064-JDK-65 | |||
| 2-7/8" Jaw Die Kit | 1064-JDK-70 | |||
| 3" Jaw Die Kit | 1064-JDK-71 | |||
| 3-1/8" Jaw Die Kit | 1064-JDK-72 | |||
| 3-3/8" Jaw Die Kit | 1064-JDK-74 | |||
| 3-1/2" Jaw Die Kit | 1064-JDK-75 | |||
| 4" Jaw Die Kit | 1064-JDK-80 | |||
| 4-1/8" Jaw Die Kit | 1064-JDK-82 | |||
| 4-1/2" Jaw Die Kit | 1064-JDK-85 | |||
| 4-3/4" Jaw Die Kit | 1064-JDK-87 | |||
| 5" Jaw Die Kit | 1064-JDK-90 | |||
| 5-1/2" Jaw Die Kit | 1064-JDK-95 | |||
| 95mm Jaw Die Kit | 1064-JDK-77 | |||
| Standard 3.875" FLAT DIE INSERT | 12-1003 | |||