Farr KT8625, Intermediate Power Tongs
(Note: Effective June 2010, Our KT7585 model is being rebadged as KT8625. There have been no design changes to this tong, it still functions the same and has the same torque and RPM.)
Texas International Oilfield Tools, LTD. the world's largest stocking distributor of Farr Canada products.
DOWNLOAD MANUAL file updated 9/10
| Farr KT8625 8-5/8" - 25K Power Tong | |
| Torque Range: | |
| High Gear: | 5,000 ft-lbs. / 6780 Nm |
| Low Gear: | 25,000 ft-lbs. / 33900 Nm |
| Maximum RPM @ 60 GPM / 227 LPM | |
| High: | 48 RPM |
| Low: | 9 RPM |
| Hydraulic Requirements (max.): | 60 GPM @ 1,000 PSI / 227 LPM @ 6.9 Mpa 10 GPM @ 2,000 PSI / 37.8 LPM @ 13.8 Mpa |
| Length: | 56 inches / 142.2 cm |
| Overall Width: | 30 inches / 76.20 cm |
| Space Required on Pipe: | 8 inches / 20.32 cm |
| Maximum Elevator Diameter: | Unlimited (tong comes off pipe) |
| Torque Arm Length: | 36 inches / 91.44 cm -centerline of pipe to centerline of anchor |
| Weight (Approximate): | 12,000 lbs. / 540 kg |
| 4500 lb. / 2043kg. | |
| Jaws available (inches): | 2.875, 3.5, 4, 4.5, 5, 5.5, 6.625, 7 7.625, 7.75 and 8.625 |