Farr KT8625, Intermediate Power Tongs with Clincher Back-up
(Note: Effective June 2010, Our KT7585 model is being rebadged as KT8625. There have been no design changes to this tong, it still functions the same and has the same torque and RPM.)
Texas International Oilfield Tools, LTD. the world's largest stocking distributor of Farr Canada products.
DOWNLOAD MANUAL file updated 9/10
| KT8625 Power Tongs with Hydraulic Clincher Back-up | ||||
| Torque Table: | ||||
| Pressure | High Gear | Low Gear | ||
| PSI/MPa | Lbs.-ft. | Nm | Lbs.-ft. | Nm |
| 1000/6.89 | 2100 | 2847 | 10200 | 13829 |
| 1500/10.34 | 3300 | 4474 | 16500 | 22371 |
| 2000/13.79 | 4600 | 6237 | 22800 | 30913 |
| 2200/15.17 | 5100 | 6915 | 25400 | 34438 |
| MAXIMUM RATED TORQUE: 25000 LBS.-FT./25354 Nm | ||||
| Speed Table | ||||
| Flow (US GPM/LPM) | Low Gear (RPM) | High Gear (RPM) | ||
| 10/37.9 | 2.0 | 10.0 | ||
| 20/75.71 | 4.0 | 19.0 | ||
| 40/151.4 | 8.0 | 39.0 | ||
| 50/189.3 | 10.0 | 48.0 | ||
| Hydraulic Requirements (max.) | 50 US GPM @ 1000 psi (189 LPM @ 6.9 MPa) 10 US GPM @ 2000 psi (38 LPM @ 13.8 MPa) |
|||
| Length (Door Closed): | 57-1/8 " inches / 145 cm | |||
| Height: | 36-3/4" inches / 67 cm | |||
| Width: | 36-3/4" / 67cm. | |||
| Space Required on Pipe: | 6-3/4" / 17.1 cm | |||
| Torque Arm Length: | 32" / 81.33 cm - Centerline of pipe to Centerline of anchor - |
|||
| Maximum Elevator Diameter: | N/A | |||
| Weight (Approximate): | 2950 lb / 1341 kg. | |||
| Casing Jaws Available (inches): | Standard sizes from 3-5/8" to 8-5/8". Call Sales for special jaw sizes. | |||