Texas International Oilfield Tools LTD. Mfg'd Hydraulic Cathead Precision EZY Torque
MADE IN THE USA
Both a Make-up & Break-out Cylinder- Precision Torque range 40,000-170,000 ft/lb. Below 40,000 calibrate with load cell.
- Complete with remote control
- Hydraulic power unit 60 HZ, 460V / 230V three phase or 50 HZ, 380V / 220V three phase
- Full Specifications below
FILE DOWNLOADS: Each download opens in its own window.
EXPLODED VIEW OF THE CONTROL BOX
EZY TORQUE MANUAL DOWNLOAD
Texas International Oilfield Tools LTD. Mfg'd Hydraulic Cathead Precision EZY Torque Specifications:
Cylinder Assembly:
Bore: 6.00 inches
Stroke: 24.5 inches
Full stroke wireline travel: 45 inches
Maximum pull force: 35343 pounds
Maximum operating pressure: 2500 psi
Torque range: 40,000 to 170,000 ft-lbs (when applying less than 40,000 ft-lbs, verify setting with a load cell.)
Weight: 750 pounds approximately
Hydraulic Power Unit:
Power: 10 hp / 1760 rpm @ 60 hz, 12.8 A @ 460 V or 25.5 A @ 230 V, three phase 7.5 hp / 1445 rpm @ 50 hz, 15.7 A @ 380 V or 31.3 A @ 220 V, three phase
Pump: two stage with unloader
Output: 18.89 gpm to 700 psi, 4.73 gpm to 2500 psi @ 60 hz
15.51 gpm to 700 psi, 3.88 gpm to 2500 psi @ 50 hzReservoir capacity: 30 gallons
Maximum operating pressure: 2500 psi
Internal set pressures: main relief, 2750 psi, unloader 700 psi
Weight: 800 pounds dryRecommended oils: Mobil DTE 24, Castrol Hyspin VG 32, Royal Purple Syndraulic 32, Shell Tellus 32, PetroCanada Environ AW 32. In warmer climates, ISO viscosity grade 46 is a good choice as well.