The KT13625 casing tong can handle tubulars as small as 3-1/2″ and as large as 13-5/8″ in diameter. Wraparound jaw and die technology for the two tong jaws is available. Tong can be mounted on either a CLINCHER® or a FARR hydraulic backup. Available with McCoy’s patented WinCatt® data acquisition and torque control system for the make-up of tubular connections.
Part No:
80-0931-1
Size range:
3-1/2″ to 13-5/8″
Hydraulic power supply:
2,750 psi and 60 gpm (18.96 MPa and 227.1 lpm)
Maximum low gear torque and speed:
35,640 ft.-lb. and 10 rpm
Maximum high gear torque and speed:
7,130 ft.-lb. and 48 rpm
Torque handle length:
36″ (91.4 cm)
Overall length (Doors Closed):
59-1/4″ (150.5 cm)
Overall width:
33″ (83.8 cm)
Overall height:
47″ (119.4 cm)
LOCKJAW™ 15000
FARR Wedge Style 14625
FARR Cam Style 13625
Wraparound or Dovetail jaws
Fine Tooth Steel or GRITFACE® dies
Lift cylinder or spring hanger
Load cell/Torque gauge
Rigid bail or chain bail
CE Marked and Registered for International Use.
1,550 lb. (705 Kg)