Texas International Oilfield Tools (TIOT) offers “Y” center latch, slip type manual elevators for tubing (YT, MYT) and casing (YC, HYC, MYC). See Specification table on page 5 for load capacity and size ranges. The elevators hoist a variety of small casing and tubing with the proper size slips and slip setting ring installed. The slips are easily changed. The elevator is designed with two (2) halves of similar weights for good balance and easier opening and closing. A guarded operating latch and an extra handle at the rear of the elevator allow for easier, safer operation. Elevators are equipped with a latch and latch lock combination. To open, pull the latch lock handle out and swing the elevator apart. The latch and latch lock secures automatically when the elevator is closed around the pipe. The load causes the slips to set when the elevator is raised, pushing down on the slip setting ring.
Ensure all slip inserts are free in the up position when latching the elevator
Use the ears for lifting elevator – NOT the handles
HYC 3-1/2″ – 7-5/8″ -200 Ton
MYC 3-1/2″ – 7″ -125 Ton
YC 3-1/2″ – 7″ -75 Ton
YT 1.315″ – 3-1/2″ -75 Ton
MYT 1.315″ – 2-7/8″ -40 Ton
The terms VARCO, VARCO-BJ, and BJ are trademarks of Varco I/P, Inc., National Oilwell Varco, L.P., or their affiliates. Texas International Oilfield Tools is not an authorized distributor of any Varco I/P or NATIONAL OILWELL VARCO product. Texas International Oilfield Tools is not affiliated with Varco I/P, Inc., National Oilwell Varco, L.P., or their affiliates. Varco I/P, Inc., National Oilwell Varco, L.P., and their affiliates do not endorse any Texas International Oilfield Tools’ products or replacement parts.