Farr KT20000, 20"-50K Power Tongs
Texas International Oilfield Tools, LTD. the world's largest stocking distributor of Farr Canada products.
| KT20000 - 20" - 50K Hydraulic Tongs | ||
| Available Torque - Staffa HMB 80 Motor | ||
| Pressure (PSI) | High Gear (lbs. ft.) | Low Gear (lbs. ft.) |
| 1000 | 2600 | 16900 |
| 1500 | 4400 | 28500 |
| 2000 | 6200 | 40200 |
| 2500 | 8000 | 51800 |
| MAXIMUM RATED TORQUE: 50000 LBS.FT. | ||
| Available Torque - Rincer GA125 Motor | ||
| Pressure (PSI) | High Gear (lbs. ft.) | Low Gear (lbs. ft.) |
| 1000 | 2500 | 16000 |
| 1500 | 4100 | 26800 |
| 2000 | 5800 | 37700 |
| 2500 | 7400 | 48500 |
| MAXIMUM RATED TORQUE: 50000 LBS.FT. | ||
| Available Speed - Staffa HMB 80 Motor | ||
| Flow (US GPM) | Low Gear (RPM.) | High Gear (RPM.) |
| 10 | 1 | 8 |
| 20 | 2 | 16 |
| 40 | 5 | 32 |
| 60 | 7 | 49 |
| Hydraulic Requirements (max.): | 60 US GPM @ 1000 psi (227 LPM @ 6.9 MPa) 10 US GPM @ 3000 psi (38 LPM @ 20.7 MPa) |
|
| Max. Length(Doors Closed): | 80-1/4" / 203.8 cm | |
| Height (Staffa Motor): | 28" / 71.1 cm | |
| Height (Rineer Motor): | 25-3/8" / 64.5 cm | |
| Overall Width: | 50.5" / 128.3 cm | |
| Space Required on Pipe: | 10" / 25.4 cm | |
| Maximum Elavator Diameter: | N/A | |
| Torque Arm Length: | 52" / 132.1 cm | |
| - Centerline of pipe to Centerline of anchor - | ||
| Weight (Approximate): | 3200 lb./ 1452 kg. | |
| Casing Jaws Available (inches): | 8-5/8" through 20" | |
